What a Plastic Pipe Production Line Includes
Category: Knowledge
Release Date: 2026-11-17
Summary:
The Pipe production line on this page is a plastic pipe extrusion line from Chengdu 66 Plastic Machinery Technology Co., Ltd. The page lists the main equipment as a conical twin screw extruder, a power driven pipe module, a vacuum calibration tank, a cooling spray chamber, a haul off unit, a circular cutting machine and a stacking rack. It presents the line as a complete set for plastic pipe production and names high production efficiency, low cost, low energy consumption and stable performance as the main advantages. For a buyer, the component list is the useful starting point, because each unit sets a different limit on the pipe range and the output.
Extrusion and Calibration
The conical twin screw extruder melts and pushes the compound, and the power driven pipe module forms the pipe at the die. The vacuum calibration tank then holds the outside diameter while the pipe cools, and the cooling spray chamber brings the temperature down before the haul off. The page does not give the screw diameter, the motor power, the output rate or the pipe diameter range for this line. Those values should be confirmed for the specific model, because a line for a small diameter pipe is not the same as a line for a large diameter pipe. A buyer should send the pipe diameter, the wall thickness, the material and the target output before asking for a quotation.
Haul Off, Cutting and Stacking
The haul off unit pulls the pipe at a steady speed, and the circular cutting machine cuts it to length. The stacking rack receives the finished pipe. The page does not give the haul off speed, the cutting tolerance or the maximum pipe length. A buyer should confirm the cutting method and the length range, because a pipe that is cut on the fly needs a different control than a pipe that is cut after a stop. The page also does not give the control system, the number of motors or the installed power, so the electrical load should be requested with the layout drawing.
Line Layout and Utilities
A pipe line is laid out in a straight run, so the length of the line and the space around it decide the factory layout. The page does not give the overall length, the width, the height or the foundation plan. A buyer should ask for the layout drawing and the utility list before the floor is prepared. The line needs power, cooling water and compressed air, and the chiller or the cooling tower may be outside the scope. The page does not say which items are included. A clear scope list avoids a surprise during installation, especially when the line is shipped to an overseas plant.

Output, Energy and Cost
The page says the line is known for high production efficiency, low costs, low energy consumption and stable performance. Those are general claims rather than measured figures. A buyer should ask for the output per hour for the agreed pipe size, the specific energy consumption and the scrap rate. A trial run with the buyer material is the practical way to confirm the output and the pipe quality. The page does not give a warranty period, a spare parts list or a service scope, so those items should be agreed in the contract, together with the commissioning support and the operator training.
About Chengdu 66 Plastic Machinery
The company site lists a PVC sheet production line, a pipe production line, a synthetic resin tile production line and other machinery, together with product cases, partner clients, company news and exhibition information. The contact details on the page are the phone number and the email address in the header, and the site has an online message form. A buyer can send the pipe specification, the material, the target output and the factory layout, and ask for a proposal with the line configuration, the utility list and the delivery schedule. The page does not give a factory address for an audit, so that detail should be requested if a visit is planned.
For a first project, we suggest a staged approach. Start with a single line and a defined pipe range, confirm the output on the buyer material, and keep the option to add a second line later. Ask for the electrical drawing, the layout and the spare parts list with the quotation, and agree the acceptance test before shipment. The Pipe production line from Chengdu 66 Plastic can then be evaluated on the same basis as other offers, with the pipe range, the output and the service scope written down rather than assumed.
Keywords: What a Plastic Pipe Production Line Includes
Related Information
2026.11.17
Contact Us
Email:18200492997@163.com
yyc13980721280@qq.com
Phone:028-68932896
TEL/WhatsApp: +86-13980721280
Address: No. 1159, Junyue Road, East Zone, Xindu Industrial Park, Chengdu
Website:300.cn
Customer Service Hotline:028-68932896
QQ Customer Service:18200492997
Corporate email:18200492997@163.com
WhatsAPP:8618200492997